CCM01-2013APLFT T30

C 1 0 10 20 XXXXXX XXXX 51,5 9,6 (2,64) Card end travel switch terminals 0,85 x 0,7 15,2 12,9 1,5 8x 15,5 9,6 6 0,9±0,25 C1 C2 C3 C4 7,6 7,6 14 B 10 36,25 9,2 14 A 2 SW SW 3,81 3,81 5,7 RECOMMENDED PC BOARD LAYOUT (Component side) 33,49 Contact foot area 1 x 0,7 Pad Plastic outline Card stop A-A SEE DETAIL A (36,25) (50,2) 29,49 0,2±0,15 A 2 1 XX X XX XXX XX 18,87 21,41 23,95 26,49 51,5 17/12/2012 2 0,7 VISA GP SYSTEM CONFIDENTIAL 2 0,3 A B DATE Scale 1 (7,6) 10x 2x 2,54 2x 2,2 0,2 A B 0 1,65-0,1 18,87 NATURE DE LA MODIFICATION the 6 pins removed (55,7) 6,2 2 Pegs 4 F XXXXXX XXXX 3 REV. N° DCR E ECR-8638 0 2,1 1 DETAIL A Scale 5 E 0,85 54,3 Card entry D 3,14+0,05 0 2x 0,7 (9,6) 55,7±0,1 2 B 1,05+0,05 -0,15 Card entry 4,3±0,2 A C5 C6 C7 C8 3 3 A WITHOUT THE WRITTEN PERMISSION OF C&K COMPONENTS SAS. IT CAN NOT BE REPRODUCED OR TRANSMITTED THIS DRAWING IS THE PROPERTY OF C&K COMPONENTS SAS. Pick and place area Packaging Packaging drawing Tray 30 parts 030278Y0043 Tray 25 parts 030278Y0064 Reel 030278Y0059 20 13 Marking 2013TP Marking & Date-Code area 4,15±0,3 Card entry Designation Part Number CCM01-2013AP LFT T30/ Y1112-2013APLFT CCM01-2013CP LFT T25/ Y1112-2013CPLFT CCM01-2013BP LFT R201 Y1112-2013BPLFT Notes : - 1 - Termination to PCB : SMT reflow soldering Temperature/time profile according to : C&K PS-LF-001 specification. Since there are no boardlocks , the connector must be held in place on the PCB accross the top face of the cover. 4 - 2 - Level of each contact tail compared to the nearest plastic stand-off. Coplanarity of metal soldering surfaces : 0,15 mm - 3 - Recommendation for solder paste thickness > 0,2 mm. - 4 - 2,5 microns min tin plating on contact terminal areas. 0,1 microns min gold plating on switch terminal areas. Contact location according to ISO/IEC 7816-2 Card insertion direction MATERIAL / VOLUME - 5 - Contact forces : - max 0,5 N per contact with max. card thickness. - min 0,2 N per contact with min. card thickness. - 6 - Card end travel switch NO activates when the sliding card is 0,9 mm from the card stop. - 7 - In case of customer accessories integration requesting an interface with CCM, please ask C&K for a 3D model. UNLESS OTHERWISE : - DIMENSIONS GIVEN BEFORE PROTECTION - BURRS AND SHARP EDGES DELETED CREATE BY DATE CHECKED BY PAILLE V. . APPROVED BY Laurent Kubat TREATMENT ANGULAR TOLERANCE ± 2 LINEAR TOLERANCE ± 0,1 SURFACE FINISH Ra . 03/07/2007 DATE . DATE SCALE SIZE B C D 0,1 2x 3,2 PROTECTION CRITICAL ° DIMENSIONS . . SPC DIMENSIONS MODIFICATION see revision table on the first sheet REPLACE . FILENAME 1112M1Y2013_JO74IR FOLDER Dossier racine/dole_south_rd/ccm01/mk2/v2 PART DESCRIPTION CCM01-2013xPLFT 2 pegs 3,14 mm . 2,00 SHEET A3 1 2x MODIFIED ON THIS REV. . +02'00' . 2012.09.17 13:44:39 BP 359 - 39105 Dole - FRANCE A 10x 1,3 0.2 2,1 PART NUMBER / 1 E CU 1112M1Y2013 F 4 REV E